Leakage current and electric strength at operating temperature
Leakage current meter, isolation transformer, HV test supply, Network(Fig.4 of IEC60990)
R
工作溫度下的泄漏電流及電氣強度
接觸電流測試儀
耐壓測試儀
14
Transient overvoltage
Inpulse voltage test generator and monitor
R
瞬態超壓
脈沖發生器
15
Moisture resistance
Oscillating hoop IP test equipment, measurement beaker, spray nozzle
R
潮態電阻
滴水試驗裝置
擺管灑水裝置
手動灑水裝置
灌水試驗裝置
16
Leakage current and electric strength
Environmental chamber capable of 93%RH at selected temp. with HV test facilities
R
泄漏電流和電氣強度
恒溫恒濕箱
泄漏電流計
耐壓測試器
17
Overload protection of transformers and associated circuits
Included above
變壓器過載保護
18
Endurance
As required by part 2's
R if assessed
19
Abnormal operation
As above with suitable protection against damage to equipment personnel and property in event of abnormal failure
R
非正常工作
Electrostatic discharge test apparatus (IEC 61000-4-2), Radiated field test apparatus (IEC 61000-4-3), Fast transient burst test apparatus (IEC 61000-4-4), Voltage surge test apparatus (IEC 61000-4-5), Injected current test apparatus (IEC 61000-4-6), Voltage dip and interruption test apparatus (IEC 61000-4-11), Mains signal test apparatus (IEC 61000-4-13)
S
電磁兼容抗擾度
20
Stability and mechanical hazards
Inclined plains
R
穩定性和機械強度
傾斜平臺
masses
R
關節試驗指
force gauges
R
推拉力計
21
Mechanical strength
Impact hammer
R
機械強度
彈簧沖擊器
Hardened steel pin
R
Force gauges
R
22
Construction
R
結構
IP1X測試棒及鋼球
R
IP2X測試鋼球
R
IP3X測試棒
R
IP4X測試棒
R
IP5X,IP6X砂塵箱
Test rig for torque on pin supported appliance
R
插座扭矩測試儀
Heating cabinet(70 ±2?)
R
烘箱
Test probe 11 of IEC61032
R
直型試驗指
Test fingernail
R
試驗指甲
Force gauge,Test finger nail
R
推拉力計
Oxygen bomb
S
氧彈試驗儀
Methylated spirits and Pressure appratus
S
酒精和壓力裝置
Water pressure test apparatus
R
水壓測試裝置
23
Internal wiring
Flexing test apparatus
R
內部布線
內部電源線彎折試驗儀
24
Components
Laboratory may or may not have facilities for testing to component standards. Certification by specialist laboratories is accepted for compliance
S
元件
25
Supply connection and external flexible cords
Flexing test apparatus
R
電源連接和外部軟線
電源線彎曲試驗儀
Cord anchorage force & torque tester
R
電源線拉扭試驗儀
26
Terminals for external conductors
Torque screwdriver
R
外部連接端字
扭力起子
27
Provision for earthing
Earth continuity tester, access to ISO2178 and 1463 testing
R
接地
接地電阻測試儀
28
Screws and connections
Torque gauge
R
螺釘和連接
扭力起子
29
Creepage distances, clearances and distance through insulation
Mechanical measurement tools, Rod and ball gauges
R
爬電距離
爬電距離量規
Proof tracking test apparatus
R
30
Resistance to heat and fire
Ball Pressure test apparatus
R
耐熱和阻燃
球壓試驗器
Glow wire
R
灼熱絲測試儀
Needle flame test apparatus
R
針焰測試儀
Horizontal and vertical burning test apparatus
R
水平垂直燃燒儀
Apparatus for low power circuit determination
R
漏電起痕試驗儀
31
Resistance to rusting
Part2 requirements
32
Radiation, toxicity and similar hazards
Part2 requirements
Annex A
Routine tests
None
Annex B
Appliances Powered by rechargeable batteries
Free fall test apparatus (IEC60068-2-32)
R
充電電池供電的器具
滾筒跌落試驗儀
Annex C
Ageing Test on Motors
Nothing special
Annex D
Alternative requirements for protected motors
Nothing special
Annex E
Needle flame test
Needle flame test apparatus (IEC 60695-2-2)
R
針焰試驗
針焰測試儀
Annex F
Capacitors
Impulse voltage test apparatus, Endurance test apparatus (IEC 60384-14)
S
電容器
脈沖發生器
電容器壽命測試裝置
Annex G
Safety isolating transformers Circuit for measuring leakage current